AMSTEEL®-X

All Products Print Page

AMSTEEL®-X

Introducing AmSteel-X, Optimized specifically for Mooring; AmSteel-X comes standard with hi-visibility colors, permanent twist identification, length markings and a patent pending end for end indication that you can recognize at a glance. The multi-colored strands make splicing, inspecting and identifying wear zones easier than ever. Samson makes selecting the best mooring lines for your needs easier: AmSteel-X sizes are MEG-4 ready, approved and come with MEG4 documentation. AmSteel-X is a non-rotational, torque-free, 12-strand single braid made with reduced creep Dyneema® SK78. Combined with Samson’s proprietary coating method and Samthane coating, AmSteel-X provides abrasion and tension fatigue resistance for superior wear. AmSteel-X - Increasing safety and efficiency in mooring with every improvement we make. AmSteel-X has been verified by ABS according to MEG4 and is type approved by RMRS.

Product Code

823

Specific Gravity

0.98

Fiber (Core/cover)

HMPE

Splice

12-Strand Class II

at Percent of break strength
10% 20% 30%
Elastic Elongation
0.46% 0.70% 0.96%

General Working Line   •   Primary Mooring Line

Abrasion resistant   •   Excellent wear characteristics   •   Flexible   •   Floats   •   High-strength; low stretch   •   Maximum strength-to-weight ratio   •   MEG4 Fiber Grade: Dyneema® SK78   •   Non-jacketed   •   Non-rotational

LDBF  (LB) 98,100 115,000 120,000 125,000 130,000 136,000 141,000 148,000 154,000 161,000 168,000 176,000 185,000 194,000 203,000 212,000 221,000 230,000 239,000 247,000 256,000 266,000 283,000 291,000 306,000 315,000 326,000 339,000 353,000
DIAM.  (INCH) 1 1 1/16 1 3/32 1 7/64 1 1/8 1 5/32 1 3/16 1 7/32 1 1/4 1 9/32 1 19/64 1 5/16 1 3/8 1 13/32 1 7/16 1 15/32 1 1/2 1 17/32 1 35/64 1 9/16 1 5/8 1 21/32 1 11/16 1 23/32 1 3/4 1 13/16 1 7/8 1 15/16 2
LINEAR DENSITY  (LB/100FT) 21.7 26.5 27.3 27.9 28.9 29.7 31.1 32.9 34.8 36.2 36.7 39.1 40.7 42.5 44.4 46.3 49.2 51.2 52.9 55.2 56.4 58.3 61.4 64 68.2 70.7 74.6 78.3 83.2
LB LINEAR DENSITY  (LB/100FT) 21.7 26.5 27.3 27.9 28.9 29.7 31.1 32.9 34.8 36.2 36.7 39.1 40.7 42.5 44.4 46.3 49.2 51.2 52.9 55.2 56.4 58.3 61.4 64 68.2 70.7 74.6 78.3 83.2
LDBF  (MT) 44.5 52 54.5 56.5 59 61.5 64 67 70 73 76 80 84 88 92 96 100 104 108 112 116 121 128 132 139 143 148 154 160
DIAM.  (MM) 24 26 27 27.5 28 28.5 29 29.5 30 31 31.5 32 34 34.5 35 35.5 36 37 37.5 38 40 41 42 43 44 45 46 47 48
LINEAR DENSITY  (KG/100M) 32.3 39.4 40.6 41.5 43 44.2 46.3 49 51.8 53.9 54.6 58.2 60.6 63.2 66.1 68.9 73.2 76.2 78.7 82.1 83.9 86.8 91.4 95.2 101 105 111 117 124
LB LINEAR DENSITY  (KG/100M) 32.3 39.4 40.6 41.5 43 44.2 46.3 49 51.8 53.9 54.6 58.2 60.6 63.2 66.1 68.9 73.2 76.2 78.7 82.1 83.9 86.8 91.4 95.2 101 105 111 117 124

Line Design Break Force (LDBF): The minimum force that a new, dry, spliced mooring line will break when tested according to MEG4 appendix B. Linear Density (LD): Linear density of line measured at reference load.

Know What You Need?

Buy Now