MP-1TM

MP-1 is a non-rotational rope with excellent abrasion and wear resistance for use as a pendant in vessel mooring applications. It has been proven to have superior abrasion resistance and strength retention with extensive use. MP-1 also provides a 10% lower linear density (lbs./ft.) compared to traditional 100% polyester fiber pendant constructions, which makes for easier handling by crew members in mooring situations. MP-1 tails are verified by ABS according to MEG4.

Product Code

264

Specific Gravity

1.2

Fiber (Core/cover)

Polyolefin - Polyester Blend

Splice

8-Strand Class I

at Percent of break strength
10% 20% 30%
Elastic Elongation
1.30% 1.95% 3.05%

Mooring Tails   •   Primary Mooring Line   •   Secondary Mooring Lines / H-Bitt / Capstan Mooring / Soft Lines

10% lighter than 100% polyester ropes   •   Does not float   •   Durable & Flexible   •   Exposed Dynamic Stiffness=39xTDBF   •   Grommet stiffness is two times stiffness of rope size used to fabricate grommet.   •   High strength   •   Hockle resistant   •   Low elongation   •   Non-jacketed   •   Non-rotational   •   Sheltered Dynamic Stiffness=15xTDBF

LDBF  (LB) 72,000 76,500 80,100 103,000 123,000 132,000 143,000 150,000 157,000 163,000 170,000 185,000 194,000 203,000 209,000 221,000 231,000 242,000 254,000 265,000 275,000 300,000 311,000 322,000 335,000 348,000 364,000 379,000 394,000 410,000 426,000 428,000
DIAM.  (INCH) 1 5/8 1 11/16 1 3/4 2 2 1/4 2 5/16 2 3/8 2 7/16 2 1/2 2 9/16 2 5/8 2 3/4 2 7/8 2 15/16 3 3 1/16 3 1/8 3 3/16 3 1/4 3 3/8 3 7/16 3 5/8 3 11/16 3 3/4 3 7/8 4 4 1/16 4 1/8 4 1/4 4 3/8 4 7/16 4 15/32
LINEAR DENSITY  (LB/100FT) 62.7 66.5 70.3 92.2 113 123 128 137 141 150 147 169 174 183 187 200 205 218 225 231 249 274 285 296 313 327 348 367 383 399 414 422
LB LINEAR DENSITY  (LB/100FT) 62.7 66.5 70.3 92.2 113 123 128 137 141 150 147 169 174 183 187 200 205 218 225 231 249 274 285 296 313 327 348 367 383 399 414 422
LDBF  (MT) 32.7 34.7 36.3 46.5 55.9 60 65 68 71 74 77 84 88 92 95 100 105 110 115 120 125 136 141 146 152 158 165 172 179 186 193 194
DIAM.  (MM) 40 42 44 48 56 56.5 57 59 60 62 64 68 70 71 72 74 76 78 80 82 84 88 90 92 94 96 98 100 104 108 109 109.5
LINEAR DENSITY  (KG/100M) 93.3 99 105 137 168 183 190 204 210 223 219 251 259 272 278 298 305 324 335 344 371 408 424 440 466 487 518 546 570 594 616 628
LB LINEAR DENSITY  (KG/100M) 93.3 99 105 137 168 183 190 204 210 223 219 251 259 272 278 298 305 324 335 344 371 408 424 440 466 487 518 546 570 594 616 628

Line Design Break Force (LDBF): The minimum force that a new, dry, spliced mooring line will break when tested according to MEG4 appendix B. Linear Density (LD): Linear density of line measured at reference load. Load Bearing Linear Density (LBLD): Linear density of load bearing member of the line, measured at reference load per CI-1500A.

TAIL DESIGN BREAK FORCE  (LB) 72,000 76,500 80,100 103,000 123,000 132,000 143,000 150,000 157,000 163,000 170,000 185,000 194,000 203,000 209,000 221,000 231,000 242,000 254,000 265,000 275,000 300,000 311,000 322,000 335,000 348,000 364,000 379,000 394,000 410,000 426,000 428,000
GROMMET TDBF  (LB) 122,000 130,000 136,000 174,000 210,000 225,000 244,000 255,000 266,000 277,000 289,000 315,000 330,000 345,000 356,000 375,000 393,000 412,000 431,000 450,000 468,000 509,000 528,000 548,000 569,000 592,000 618,000 644,000 670,000 696,000 724,000 728,000
DIAM.  (INCH) 1 5/8 1 11/16 1 3/4 2 2 1/4 2 5/16 2 3/8 2 7/16 2 1/2 2 9/16 2 5/8 2 3/4 2 7/8 2 15/16 3 3 1/16 3 1/8 3 3/16 3 1/4 3 3/8 3 7/16 3 5/8 3 11/16 3 3/4 3 7/8 4 4 1/16 4 1/8 4 1/4 4 3/8 4 7/16 4 15/32
LINEAR DENSITY  (LB/100FT) 62.7 66.5 70.3 92.2 113 123 128 137 141 150 147 169 174 183 187 200 205 218 225 231 249 274 285 296 313 327 348 367 383 399 414 422
LB LINEAR DENSITY  (LB/100FT) 62.7 66.5 70.3 92.2 113 123 128 137 141 150 147 169 174 183 187 200 205 218 225 231 249 274 285 296 313 327 348 367 383 399 414 422
TAIL DESIGN BREAK FORCE  (MT) 32.7 34.7 36.3 46.5 55.9 60 65 68 71 74 77 84 88 92 95 100 105 110 115 120 125 136 141 146 152 158 165 172 179 186 193 194
GROMMET TDBF  (MT) 55.5 59 61.8 79.1 95.1 102 111 116 121 126 131 143 150 156 162 170 178 187 196 204 212 231 239 248 258 269 280 292 304 316 328 330
DIAM.  (MM) 40 42 44 48 56 56.5 57 59 60 62 64 68 70 71 72 74 76 78 80 82 84 88 90 92 94 96 98 100 104 108 109 109.5
LINEAR DENSITY  (KG/100M) 93.3 99 105 137 168 183 190 204 210 223 219 251 259 272 278 298 305 324 335 344 371 408 424 440 466 487 518 546 570 594 616 628
LB LINEAR DENSITY  (KG/100M) 93.3 99 105 137 168 183 190 204 210 223 219 251 259 272 278 298 305 324 335 344 371 408 424 440 466 487 518 546 570 594 616 628

Tail Design Break Force (TDBF): The minimum force that a new, wet, spliced mooring tail will break when tested according to MEG4 appendix B. Grommet Tail Design Break Force: TDBF in grommet configuration (x1.7 efficiency). Linear Density (LD): Linear density of line measured at reference load. Load Bearing Linear Density (LBLD): Linear density of load bearing member of the line, measured at reference load per CI-1500A.

DIAM.  (INCH) 1 5/8 1 11/16 1 3/4 2 2 1/4 2 5/16 2 3/8 2 7/16 2 1/2 2 9/16 2 5/8 2 3/4 2 7/8 2 15/16 3 3 1/16 3 1/8 3 3/16 3 1/4 3 3/8 3 7/16 3 5/8 3 11/16 3 3/4 3 7/8 4 4 1/16 4 1/8 4 1/4 4 3/8 4 7/16 4 15/32 4 1/2 4 5/8 4 11/16 4 7/8
CIRC.  (INCH) 5 5 1/4 5 1/2 6 7 7 1/16 7 1/8 7 3/8 7 1/2 7 5/8 8 8 1/2 8 5/8 8 3/4 9 9 1/4 9 1/2 9 9/16 10 10 1/8 10 1/4 11 11 1/8 11 1/4 11 1/2 12 12 1/4 12 1/2 13 13 5/16 13 13/32 13 7/16 13 1/2 14 14 1/8 14 5/8
WEIGHT PER 100 FT.  (LBS) 66 70 74 97 119 129 135 144 149 158 162 178 183 193 197 210 216 229 237 248 262 289 300 314 329 344 366 388 403 420 436 444 459 485 504 528
AVG. STRENGTH  (LBS) 80,000 85,000 89,000 114,000 137,000 147,000 159,000 167,000 174,000 181,000 189,000 206,000 216,000 225,000 233,000 245,000 257,000 269,000 282,000 294,000 306,000 333,000 345,000 358,000 372,000 387,000 404,000 421,000 438,000 455,000 473,000 476,000 492,000 512,000 534,000 551,000
MIN. STRENGTH  (LBS) 72,000 76,500 80,100 103,000 123,000 132,000 143,000 150,000 157,000 163,000 170,000 185,000 194,000 203,000 209,000 221,000 231,000 242,000 254,000 265,000 275,000 300,000 311,000 322,000 335,000 348,000 364,000 379,000 394,000 410,000 426,000 428,000 443,000 461,000 481,000 496,000
DIAM.  (MM) 40 42 44 48 56 56.5 57 59 60 62 64 68 70 71 72 74 76 78 80 82 84 88 90 92 94 96 98 100 104 108 109 109.5 110 112 114 118
CIRC.  (MM) 120 126 132 144 168 170 174 177 180 186 192 204 208 213 216 222 228 232 240 246 250 264 270 272 282 288 294 300 312 320 324 326 328 336 340 354
WEIGHT PER 100 M  (KG) 98.2 104 110 144 177 192 201 214 222 235 241 265 272 287 293 312 321 341 353 369 390 430 446 467 490 512 545 577 600 625 649 661 683 722 750 786
AVG. STRENGTH  (KG) 36,300 38,600 40,400 51,700 62,100 66,700 72,200 75,600 78,900 82,200 85,600 93,300 97,800 102,000 106,000 111,000 117,000 122,000 128,000 133,000 139,000 151,000 156,000 162,000 169,000 176,000 183,000 191,000 199,000 206,000 215,000 216,000 223,000 232,000 242,000 250,000
MIN. STRENGTH  (KG) 32,700 34,700 36,300 46,500 55,900 60,000 65,000 68,000 71,000 74,000 77,000 84,000 88,000 92,000 95,000 100,000 105,000 110,000 115,000 120,000 125,000 136,000 141,000 146,000 152,000 158,000 165,000 172,000 179,000 186,000 193,000 194,000 201,000 209,000 218,000 225,000
ISO 2307 STRENGTH  (METRIC TONS) 36.3 38.6 40.4 51.7 62.1 66.7 72.2 75.6 78.9 82.2 85.6 93.3 97.8 102 106 111 117 122 128 133 139 151 156 162 169 176 183 191 199 206 215 216 223 232 242 250

ISO strength specifications are for unspliced rope. All other strength specifications are for spliced rope.

Know What You Need?

Where To Buy